Grote LED Fog Lamp DELUXE harness Installation Instructions

    HARNESS

    Connection diagram on next page

    DELUXE HARNESS Features:


    Plug & Play SMART Harness for Quick Fit installation of your SAE-compliant auxiliary fog lights. This harness is designed around the consumer to simplify the installation process. Drivers can control their auxiliary fog lights using the factory headlight controls.


    The auxiliary fog light will be connected to the low beam headlight and will be on when the low beam headlights are on.


    To switch off the auxiliary fog light when the low beam headlights are on, switch the low beam headlight switch on/off twice within 20 seconds. The auxiliary light will be switched off.


    Plug and Play installation with the most common wiring connectors found in most popular makes and models. (Six different adaptors sold separately: H1, 9005, H11, H4, H13 and 9007.)

    INSTALLATION GUIDE DELUXE HARNESS

    NOTES FOR INSTALLATION:

    NOTE 1: When installing the harness, ensure every connection is securely fastened and can’t loosen over time.

    NOTE 2: The control module does not need to be grounded, nor does it get hot enough to melt plastic. Secure the control module to a new or existing bolt or screw, or use the tape provided on a plastic or metal surface.

    NOTE 3: The harness’ ground and battery 12V ring terminals must be secured to their appropriate positions on bare metal. Remove any paint, rust/corrosion, or plastic on surface.

    NOTE 4: Identify the type of low beam headlight before installing. There are 6 adaptor harnesses for specific vehicle applications (9005/9006/9012, H11, H1, H13 (9008), H4 (9003), 9007). Choose the correct adaptor harness for your application.

    Grote LED Fog Lamp DELUXE harness diagram

    12V+ Power

    Fuse

    Side of vehicle closest to battery

    Connect to Fog Lamp

    Ground (-)

    Control module

    Side of vehicle furthest from battery

    Connect to Fog Lamp

    Connect to OEM low beam harness of the vehicle

    Connect to low beam

    Input Adaptor

    Grote LED Fog Lamp basic harness Installation Instructions

    BASIC HARNESS Features:


    On/Off switch harness for installation of your SAE-compliant auxiliary fog lights. This harness is designed to control the auxiliary lights with an on/off switch.


    The on/off switch will control the auxiliary fog light. The auxiliary light will be on when the switch is in “I” position and it will be off when the switch is in “II” position.

    INSTALLATION GUIDE BASIC HARNESS

    NOTES FOR INSTALLATION:

    NOTE 1: When installing the harness, ensure every connection is securely fastened and can’t loosen over time.

    NOTE 2: The control module does not need to be grounded, nor does it get hot enough to melt plastic. Secure the control module to a new or existing bolt or screw, or use the tape provided on a plastic or metal surface.

    NOTE 3: The harness’ ground and battery 12V ring terminals must be secured to their appropriate positions on bare metal. Remove any paint, rust/corrosion, or plastic on surface.

    Grote LED Fog Lamp basic harness diagram

    Inside vehicle cab

    On/off Switch

    Headlight Cable

    Basic Harness

    Deluxe Harness

    Anti-Flicker Harness