SAE Standards & Certifications

What You Need to Know and Why

There are 2 Primary SAE Certifications to be aware of:

SAE J845 – Omnidirectional Optical Warning Device

SAE J845 – Omnidirectional Optical Warning Device
A flashing optical warning device that projects light in a horizontal 360 degree arc and vertically from 5 degrees up to 5 degrees down.

It will appear to project flashes of light to an observer positioned at a fixed location. The flashes of light may be a repetitive signal or a non-repetitive signal. If a non-repetitive signal is used it shall be a block of repetitive signals that have been characterized. This would include all 360° beacons.

SAE J595 – Directional Flashing Optical Warning Device

SAE J595 – Directional Flashing Optical Warning Device
A flashing optical warning device, in which the light source produces flashes of light, which is directionally aimed and will project a signal over a minimum area from 20° right to 20° left in a horizontal plane and from 10° up to 10° down in a vertical plane. The flashes of light may be a repetitive signal or a non-repetitive signal. If a non-repetitive signal is used it shall be a block of repetitive signals that have been characterized.

CLASS I, II, III

Which is to be used and where?

Class I Optical Warning Devices

LED Beacon on Fire TruckPrimary optical warning devices for use on authorized emergency vehicles responding to emergency situations. These devices are utilized to capture the attention of motorists and pedestrians and warn of a potentially hazardous activity or situation.

Typical Usage
Fire, Police, Ambulance and Rescue vehicles – Authorized vehicles that travel faster than the speed of traffic

Class II Optical Warning Devices

LED Beacon on construction vehiclePrimary optical warning devices for use on authorized maintenance or service vehicles to warn of traffic hazards such as a lane blockage or slow moving vehicle.

Typical Usage
Utility, Roadside Assist vehicles, construction vehicles – Over the road vehicles traveling at the speed of traffic or stopped at the side of the road.

Class III Optical Warning Devices

LED Beacon on fork liftPrimary optical warning devices for use on vehicles authorized to display an optical warning device for identification only.

Typical Usage
Forklifts, yard work machines

G24/7

World-class support for our distributors.