Contact us | Site map  


Product Catalog Technical Info About Us What's New Where to Buy Fleets Marketing Center

  PRODUCT CATALOG
New products
PerLux products
*
UltraBlueSeal products
  - Wire Harness Configuration
  - Main Harness
  - Rear Sill
  - Slim-Line
  - Jumper Harnesses
  Merchandising
Grote gear
Product search help
Part numbering guide
Image download tips
Competitive interchanges

Product catalog > UBS products


Ultra Blue Seal
Wire Harness System

Trailer Wiring and Communications Systems

 UBS image
Rear Sill Rear sill drwing-small.jpg (21794 bytes)
Plugs into main harness with a foolproof, polarity protected
mating that assures a durable weatherproof seal. Provides
multi-ring sealed, plug-in connections to upper and lower
clearance and marker lamps, identification lamps, license lamps and combination tail lamps.
66001 Rear Sill Harness
66002 (as shown) Ground Return Rear Sill
67520 Ultra-Blue-Seal Rear Sill Harness for Male Pin Lamps
67521 Ground Return Rear Sill for Male Pin Lamps

66002.jpg (14226 bytes)


  

Rear Sill with ABS Drop-Out and Status Lamp Connection

Plugs into main harness with a foolproof, polarity protected mating that assures a durable weatherproof seal. Provides multi-ring sealed, plug-in connections to upper and lower clearance and marker lamps, identification lamps, license lamps and combination tail lamps.
66004 Ground return for female pin lamps
66003 Rear Sill for female pin lamps
67523 (as shown) Rear sill for male pin lamps
67524 Ground return for male pin lamps
 

67523.jpg (14400 bytes)


  

Complete Rear Sill Harness Repair Kit

For retrofit or repair after rear end collision, permits one-man field installation in as little as 27 minutes. Proven since 1981.   All connections weather-sealed by simple, foolproof UBS plugs. Entire harness double jacketed for extra armor against road-splash and abrasion. Available through distributors, or it may be inventoried by fleets in service parts programs.

67040.jpg (15758 bytes)


  

Cut-to-Fit Wire Harness System

The Cut-To-Fit Wire Harness System adapts to the standard Grote Ultra-Blue-Seal rear sill and main harness.  Part number 67271 (24" standard male to Cut-To-Fit slim-line jumper) plugs into the rear sill elbow making a corrosion-proof connection.  Your Cut-To-Fit jumpers can be then plugged directly into the double slim-line plugs.

Cut-To-Fit wire harness mates with the Grote seven pin receptacle (nose box) with the use of either the 67260 adapter or the 67250.

67271 Rear Sill Adapter
67270 Ground Return Adapter
67260 Nose Box Adapter
67250 Double Nose Box Adapter

67271.jpg (3738 bytes)

67270.jpg (3989 bytes)

67260.jpg (4109 bytes)

67250.jpg (7243 bytes)

back to top
 
Copyright 2005 Grote Industries • All Rights Reserved Terms of use Contact us Employment Opportunities