Grote Industries: UBS

Lamp Jumper Harnesses

Provide connections to marker and license lamps through weatherproof UBS plugs. Plug directly into multi-ring sealed receptacles in the rear sill harness.

Standard Male to Standard Female

66100	(as shown) 4' 4" (52") license lamp jumper
66101	28' 3" (339") intermediate turn signal jumper. Use with 66200 from front receptacle.

Slim-Line Under-Lamp Male to Standard Female

66110

5' (60") jumper to access auxiliary drop-out on rear sill harness

Standard Male to Slim-Line Under-Lamp Female

66170

2' (24") rear tracking lamp jumper

Standard Male to Double Slim-Line Under-Lamp Female

66181	(as shown) 2' (24") low mount ID lamp jumper. Use with 66160.
66180	14' (168") upper ID lamp jumper. Use with 66160.
66182	26' (312") intermediate side marker from rear. Use with 66162 crossover.
66120	30' (360") side marker jumper
66115	31' (372") side marker jumper
66114	33' (396") side marker jumper
66112	34' (408") lower side marker jumper

Slim-Line Under-Lamp Male to Slim-Line Under-Lamp Female

66162

8' 9" (105") intermediate side marker crossover jumper

Slim-Line Under-Lamp Male to Double Slim-Line Under-Lamp Female

66160	(as shown) 1' (12") multiple ID lamp jumper
66124	2' 6" (30") front marker lamp jumper
66161	4' 7" (55") front lower side marker from front receptacle. Use with 66190.
66125	7' (84") front marker lamp jumper
66123	10' 9" (129") front side marker jumper
66163	12' 8" (152") front upper clearance/marker from front receptacle. Use with 66190.
66122	16' (192") front side marker jumper
66113	26' 11" (323") clearance lamp jumper

Blunt Cut to Double Slim-Line Under-Lamp Female

66190

8" blunt cut. Wire into front receptacle terminals.

Blunt Cut to Standard Female

66200

8" blunt cut. Wire into front receptacle terminals.

Double Slim-Line Female to Ring Terminal

66210

12" jumper to accommodate insulated ground return system. Should be affixed to brass ground on rear sill harness. Crimp-on 1/4" ring terminal and heat shrink tube supplied unattached.

Two Standard Males to Two Slim-Line Under-Lamp Female

66220	(as shown) 10' 10" (130") ID/auxiliary stop jumper. For use with 5306 combination clearance/marker and auxiliary stop/turn signal lamp. Use with 66400 when triple ID/auxiliary stop is located on upper rail.
66121	30' (360") mid-turn & marker lamp harness
66104	31' 2" (374") mid-turn & marker lamp harness
66130	32' 4" (388") mid-turn & marker lamp harness
66105	35' 4" (424") mid-turn & marker lamp harness

Two Slim-Line Males to Two Slim-Line Under-Lamp Females

66221	(as shown) 5' (60") marker lamp or ABS fault lamp
66222	8' (96") harness

Standard Male/Standard Female to Two Slim-Line Under-Lamp Females

66223	2' (24") ground return tracking harness
66224	(as shown) 3' (36")

One Standard Male and One Slim-Line Male to Two Slim-Line Under-Lamp Females

66821	(as shown) 4' 7" (55") side marker/auxiliary side turn lamp jumper. For use with lower front mounted 5306 combination lamp wired from front receptacle.
66822	28' 3" (339") side marker/auxiliary side turn lamp jumper. For use with lower front mounted 5306 combination lamp wired from front receptacle.

Standard Wiring Kits for Vans

Contains all lamp jumper harnesses and pigtails to plug all rear lights into rear sill harness. Kits include: (1) 66100 for use as license lamp harness (2) 66170 for use as tracking lamp harnesses (1) 66180 for use as identification lamp harness (2) 66160 (as shown) for use as identification lamp extension harnesses (5) lamp pigtails: 66800 for factory-sealed systems or 67120 for field re-sealable systems.
66500	Kit for Factory-Sealed Lamp System
66510	Kit for Field Re-Sealable Lamp System